Marzano & Sons
General Engineering Contractors, Inc.
P.O. Box 178
June Lake, CA 93529
California Contractors License #712421
Employee Communication & Compliance
General Industry Safety Orders
Code of Safe Practices
Reviewed and Revised 1/30/2023
It is our policy that everything possible will be done to protect employ ees, customers and visitors from accidents. Safety is a cooperative undertaking that requires participation by every employee. Failure by any employee to comply with safety rules will be grounds for corrective discipline. Supervisors shall insist that employees observe all applicable Company, state and federal safety rules and practices, and take action as necessary to obtain compliance.
To carry out this policy:
- Employees shall report all unsafe conditions and equipment to the supervisor or safety coordinator
- Employees shall report immediately all accidents, injuries and illnesses to the supervisor or safety coordinator.
- Anyone known to be under the influence of intoxicating liquor or drugs shall not be allowed on the job while in that condition.
- Horseplay, scuffling, or other acts that tend to adversely influence the safety or well being of the employees are prohibited.
- Means of egress shall be kept unblocked, well lighted and unlocked during work hours.
- In the event of a fire, sound the alarm and evacuate.
- Upon hearing a fire alarm, stop work and proceed to the nearest clear exit. Gather at the designated location.
- Only workers trained for it may attempt to respond to a fire or other emergency.
- Exit doors must comply with fire safety regulations during business hours.
- Keep stairways clear of items that can be tripped over. All areas under stairways that are egress routes should not be used to store combustibles.
- Materials and equipment will not be stored against doors or exits, fire ladders or firr extinguisher stations.
- Aisles must be kept clear at all times.
- Work areas should be maintained in a neat, orderly manner. Throw trash and refuse into proper waste containers.
- All spills shall be wiped up promptly.
- Always use the correct lifting technique. Never attempt to lift or push an object that is too heavy. Contact the supervisor when help is needed to move a heavy object.
- Never stack material precariously on top of lockers, file cabinets or other high places.
- When carrying objects, use caution in watching for and avoiding obstructions or loose material.
- Do not stack material in an unstable manner.
- Report exposed wiring and cords that are frayed or have deteriorated insulation, so that they can be repaired promptly.
- Never use a metal ladder where it could come in contact with energized parts of equipment, fixtures or circuit conductors.
- Maintain sufficient access and working space around all electrical equipment for ready and safe operations and maintenance.
- Do not use any portable electrical equipment or tools that are not grounded or double insulated.
- Plug all electrical equipment into appropriate wall receptacles, or into an extension of only one cord of similar size and capacity. Three-pronged plugs should be used to ensure continuity of ground.
- All cords running into walk areas must be taped down or inserted through rubber protectors to prevent tripping hazards.
- Inspect motorized vehicles and other mechanized equipment daily or prior to use.
- Shut off engine, set brakes and block wheels prior to loading or unloading vehicles.
- Inspect pallets and their loads for integrity and stability before loading or moving.
- Do not store compressed gas cylinders in areas that are exposed to heat sources, electric areas or high temperature lines.
- Do not use compressed air for cleaning off clothing unless pressure is less than 10 psi.
- Identify contents of pipelines prior to initiating any work that affects the integrity of the pipe.
- Wear hearing protection in all areas identified as having high noise exposure.
- Goggles or face shields must be worn when grinding.
- Do not use any faulty or worn hand tools.
- Guard floor openings by a cover, guardrail or equivalent
. - Do not enter into a confined space unless tests for toxic substances explosive concentrations and oxygen deficiency have been taken.
- Always keep flammable or toxic chemicals in closed containers when not in use.
- Do not eat in areas where hazardous chemicals are present.
- Be aware of potential hazards involving various chemicals stored or used in the workplace.
- Cleaning supplies should be stored away from edible items on kitchen shelves.
- Store cleaning solvents and flammable liquids in appropriate containers.
- Keep solutions that may be poisonous or are not intended for consumption in well labeled containers.
- When working with a VDT, have all furniture adjusted, positioned and arranged to minimize strain on all parts of the body.
- Never leave lower desk or cabinet drawers open, a tripping hazard. Use care when opening and closing drawers to avoid pinching fingers.
- Do not open more than one upper drawer at a time, particularly the top two drawers on tall file cabinets.
- Keep individual heaters at work areas clear of combustible materials such as drapes or waste from wastebaskets. Use newer heaters that are equipped with tip-over switches.
- Keep appliances such as coffeepots or microwave ovens in working order and inspect them for signs of wear, heat or frayed cords.
- Fans used in work areas should be guarded, and guards must not allow fingers to be inserted through the mesh. Newer fans are equipped with proper guards.
Protecting Workers from Heat Stress
Exposure to heat can cause illness and death. The most serious heat illness is heat stroke. Other heat illnesses, such as heat exhaustion, heat cramps and heat rash, should also be avoided. There are precautions that can be taken any time temperatures are high and the job involves physical work.
Risk Factors for Heat Illness:
- High temperature and humidity, direct sun exposure, no breeze or wind
- Heavy physical labor
- No recent exposure to hot workplaces
- Low liquid intake
- Waterproof clothing
Symptoms of Heat Exhaustion:
- Headache, dizziness, or fainting
- Weakness and wet skin
- Irritability or confusion
- Thirst, nausea, or vomiting
Symptoms of Heat Stroke
- May be confused, unable to think clearly, pass out, collapse, or have seizures (fits)
- May stop sweating
To Prevent Heat Illness:
- Establish a complete heat iliness prevention program.
- Provide training about the hazards leading to heat stress and how to prevent them.
- Provide a lot of cool water to workers close to the work area. At least one pint of water per hour is needed.
For More Information:
Occupational Safety and Health Administration www.osha.gov (800) 321-OSHA